Welcome to our online Request for Quote (RFQ) service, where you can fill out and submit the form provided below to obtain tailored procurement options from our team of industry experts. You have taken interest in part number 200C, which is a Resistor Variable Wire Wound Pre item from Ace Electronics Inc that is listed with the NSN 5905-00-610-0551 for quick identification. Should you wish to move forward with quotation for this listing, be sure that you supply us with key details like your target pricing, quality, and delivery date. This information is what we will base presented quotes on, with responses offered shortly after the receipt and review of each form.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that customers only procure exact items of need, we present our offerings with as much relevant data as possible. For example, part number 200C was specifically produced by Ace Electronics Inc under the CAGE Code 02297, providing traceability. Furthermore, with the NSN 5905-00-610-0551, one can also determine that this listing falls under Federal Supply Class (FSC) 5905 Resistors. Alongside such details, all purchases will come delivered with any applicable qualifying certifications, furthering the reliability of our purchasing options. With this in mind, be sure to request a quote on part number 200C, and we will be in touch.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-610-0551 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,PRE | 5905 | 006100551 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 1578127 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 1.8745 INCHES NOMINAL |
| AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 1.703 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 1.875 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
| ABPM | BODY DIAMETER | 2.093 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.750 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 0.938 INCHES MAXIMUM |
| ADAV | OVERALL DIAMETER | 2.346 INCHES MAXIMUM |
| AECZ | MOUNTING LIP DIAMETER | 1.9850 INCHES NOMINAL |
| AEDA | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND |
| AEDZ | SHAFT BEARING TYPE | BALL |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 350.0 NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 1.20 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 0.60 INCH-OUNCES |
| AEFY | SHAFT END PLAY | 0.005 INCHES |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES |
| AEGA | LATERAL RUNOUT | 0.002 INCHES |
| AEGB | PILOT DIAMETER RUNOUT | 0.0015 INCHES |
| AEGC | SHAFT RADIAL PLAY | 0.001 INCHES |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | CLAMP RING |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.25/0.25 SINGLE SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 120.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.8 FREE AIR SINGLE SECTION |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION ABSOLUTE LINEARITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/10.0 ALL SECTIONS |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION TABLE |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 50.0 SINGLE SECTION |
| TEST | TEST DATA DOCUMENT | 10001-1578127 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 TURRET |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
