Welcome to our online Request for Quote (RFQ) service, where you can fill out and submit the form provided below to obtain tailored procurement options from our team of industry experts. You have taken interest in part number 118895, which is a Generator Engine Accessory item from Am General Llc that is listed with the NSN 2920-00-737-4750 for quick identification. Should you wish to move forward with quotation for this listing, be sure that you supply us with key details like your target pricing, quality, and delivery date. This information is what we will base presented quotes on, with responses offered shortly after the receipt and review of each form.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that customers only procure exact items of need, we present our offerings with as much relevant data as possible. For example, part number 118895 was specifically produced by Am General Llc under the CAGE Code 34623, providing traceability. Furthermore, with the NSN 2920-00-737-4750, one can also determine that this listing falls under Federal Supply Class (FSC) 2920 Engine Electrical System Components Nonaircraft. Alongside such details, all purchases will come delivered with any applicable qualifying certifications, furthering the reliability of our purchasing options. With this in mind, be sure to request a quote on part number 118895, and we will be in touch.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2920-00-737-4750 Item PartTypeName: GENERATOR,ENGINE ACCESSORY | 2920 | 007374750 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 118895 | 1 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.797 INCHES NOMINAL |
| ABPT | SECOND STEP DIAMETER | 0.669 INCHES NOMINAL |
| ABRR | KEYWAY WIDTH | 0.125 INCHES NOMINAL |
| ABVA | UNTHREADED PORTION LENGTH | 1.234 INCHES NOMINAL |
| ACJC | MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND |
| ADZC | ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND FUNGUS RESISTANT |
| AFYS | KEYWAY LENGTH | 0.625 INCHES NOMINAL |
| ANTX | DISTANCE FROM END TO KEYWAY CENTER | 1.391 INCHES NOMINAL |
| AWDP | THREAD DIAMETER | 0.500 INCHES NOMINAL |
| BCGG | MINIMUM CURRENT CUT-IN SPEED IN RPM | 1500 |
| BCGS | SHAFT DRIVE END STYLE | STRAIGHT SHAFT END,THREADED,W/KEYWAY |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 3.875 INCHES NOMINAL |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 159.0 |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 201.0 |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | 8.125 INCHES NOMINAL |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | 0.453 INCHES NOMINAL |
| BCND | MAXIMUM RATED ARMATURE SPEED IN RPM | 8000 |
| BZRR | THREAD SERIES | UNF |
| CFHL | THREAD CLASS | 2A |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC |
| CMLL | MOUNTING HOLE THREAD DIAMETER | 0.375 INCHES NOMINAL |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| ABFF | FURNISHED ITEMS | RADIO INTERFERENCE SHIELDING |
| ADER | MOUNTING STYLE | BRACKET MTD W/THREE MTG HOLES,TOP HOLE THREADED |
| AHZV | SUBMERSIBILITY | SUBMERSIBLE |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 1750 |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 25.0 |
| BCGN | GROUNDING METHOD | INTERNAL |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 3.875 INCHES NOMINAL |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | 7.250 INCHES NOMINAL |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 16 |
| ELEC | VOLTAGE IN VOLTS | 24.0 |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
