Welcome to our online Request for Quote (RFQ) service, where you can fill out and submit the form provided below to obtain tailored procurement options from our team of industry experts. You have taken interest in part number 220L1-102, which is a Resistor Variable Wire Wound Non item from Bourns Instruments Inc that is listed with the NSN 5905-00-474-3656 for quick identification. Should you wish to move forward with quotation for this listing, be sure that you supply us with key details like your target pricing, quality, and delivery date. This information is what we will base presented quotes on, with responses offered shortly after the receipt and review of each form.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that customers only procure exact items of need, we present our offerings with as much relevant data as possible. For example, part number 220L1-102 was specifically produced by Bourns Instruments Inc under the CAGE Code 80294, providing traceability. Furthermore, with the NSN 5905-00-474-3656, one can also determine that this listing falls under Federal Supply Class (FSC) 5905 Resistors. Alongside such details, all purchases will come delivered with any applicable qualifying certifications, furthering the reliability of our purchasing options. With this in mind, be sure to request a quote on part number 220L1-102, and we will be in touch.
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1" |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS" |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED" |
| ABHP | III OVERALL LENGTH | 1.035 INCHES MINIMUM AND 1.065 INCHES UM" |
| ABJT | TERMINAL LENGTH | 6.000 INCHES NOMINAL" |
| ABKW | III OVERALL HEIGHT | 0.305 INCHES MINIMUM AND 0.325 INCHES UM" |
| ABMK | III OVERALL WIDTH | 0.165 INCHES MINIMUM AND 0.175 INCHES UM" |
| ABTB | MOUNTING HOLE DIAMETER | 0.086 INCHES NOMINAL" |
| ABWV | SHAFT DIAMETER | 0.120 INCHES MINIMUM AND 0.130 INCHES UM" |
| ABXF | SHAFT LENGTH | 0.040 INCHES MINIMUM AND 0.060 INCHES UM" |
| ADAQ | BODY LENGTH | 0.995 INCHES MINIMUM AND 1.005 INCHES UM" |
| ADAT | BODY WIDTH | 0.165 INCHES MINIMUM AND 0.175 INCHES UM" |
| ADAU | BODY HEIGHT | 0.305 INCHES MINIMUM AND 0.325 INCHES UM" |
| AEDX | SHAFT STYLE | ROUND, SLOTTED" |
| AEDZ | SHAFT BEARING TYPE | BEARING" |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT" |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.745 INCHES MINIMUM AND 0.755 INCHES UM" |
| AKPV | MOUNTING FACILITY QUANTITY | 2" |
| APXH | TERMINAL LOCATION | REAR END" |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 1.000 KILOHMS SINGLE SECTION" |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 175.0 SINGLE SECTION" |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION" |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION" |
| CRTL | CRITICALITY CODE JUSTIFICATION | ZZZY" |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO 50.0 SINGLE SECTION" |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION" |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD" |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | QUALITY CONTROLLED FOR POLARIS" |
| AAPN | SECTION QUANTITY | 1" |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS" |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED" |
| ABHP | III OVERALL LENGTH | 1.035 INCHES MINIMUM AND 1.065 INCHES UM" |
| ABJT | TERMINAL LENGTH | 6.000 INCHES NOMINAL" |
| ABKW | III OVERALL HEIGHT | 0.305 INCHES MINIMUM AND 0.325 INCHES UM" |
| ABMK | III OVERALL WIDTH | 0.165 INCHES MINIMUM AND 0.175 INCHES UM" |
| ABTB | MOUNTING HOLE DIAMETER | 0.086 INCHES NOMINAL" |
| ABWV | SHAFT DIAMETER | 0.120 INCHES MINIMUM AND 0.130 INCHES UM" |
| ABXF | SHAFT LENGTH | 0.040 INCHES MINIMUM AND 0.060 INCHES UM" |
| ADAQ | BODY LENGTH | 0.995 INCHES MINIMUM AND 1.005 INCHES UM" |
| ADAT | BODY WIDTH | 0.165 INCHES MINIMUM AND 0.175 INCHES UM" |
| ADAU | BODY HEIGHT | 0.305 INCHES MINIMUM AND 0.325 INCHES UM" |
| AEDX | SHAFT STYLE | ROUND, SLOTTED" |
| AEDZ | SHAFT BEARING TYPE | BEARING" |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT" |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.745 INCHES MINIMUM AND 0.755 INCHES UM" |
| AKPV | MOUNTING FACILITY QUANTITY | 2" |
| APXH | TERMINAL LOCATION | REAR END" |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE" |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 1.000 KILOHMS SINGLE SECTION" |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 175.0 SINGLE SECTION" |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION" |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION" |
| CRTL | CRITICALITY CODE JUSTIFICATION | ZZZY" |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO 50.0 SINGLE SECTION" |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION" |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD" |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | QUALITY CONTROLLED FOR POLARIS" |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
