Welcome to our online Request for Quote (RFQ) service, where you can fill out and submit the form provided below to obtain tailored procurement options from our team of industry experts. You have taken interest in part number 1330235, which is a Generator Engine Accessory item from Daimler Chrysler that is listed with the NSN 2920-00-351-9608 for quick identification. Should you wish to move forward with quotation for this listing, be sure that you supply us with key details like your target pricing, quality, and delivery date. This information is what we will base presented quotes on, with responses offered shortly after the receipt and review of each form.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that customers only procure exact items of need, we present our offerings with as much relevant data as possible. For example, part number 1330235 was specifically produced by Daimler Chrysler under the CAGE Code 12204, providing traceability. Furthermore, with the NSN 2920-00-351-9608, one can also determine that this listing falls under Federal Supply Class (FSC) 2920 Engine Electrical System Components Nonaircraft. Alongside such details, all purchases will come delivered with any applicable qualifying certifications, furthering the reliability of our purchasing options. With this in mind, be sure to request a quote on part number 1330235, and we will be in touch.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2920-00-351-9608 Item PartTypeName: GENERATOR,ENGINE ACCESSORY | 2920 | 003519608 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 1330235 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.518 INCHES NOMINAL |
| AAUJ | SPLINE MAJOR DIAMETER | 0.874 INCHES NOMINAL |
| AAUK | SPLINE WIDTH | 0.216 INCHES NOMINAL |
| ABFF | FURNISHED ITEMS | COOLING FAN AND DRIVE PULLEY |
| ABSA | SPLINE QUANTITY | 6 |
| ADER | MOUNTING STYLE | BRACKET MTD W/THREE MTG HOLES |
| ADZC | ENVIRONMENTAL PROTECTION | FUNGUS RESISTANT |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE |
| AWDP | THREAD DIAMETER | 0.625 INCHES NOMINAL |
| AXFH | SPLINE LENGTH | 1.647 INCHES NOMINAL |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 1180 |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 55.0 |
| BCGG | MINIMUM CURRENT CUT-IN SPEED IN RPM | 775 |
| BCGN | GROUNDING METHOD | INTERNAL |
| BCGS | SHAFT DRIVE END STYLE | SPLINED SHAFT END,THREADED |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 4.438 INCHES NOMINAL |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 4.438 INCHES NOMINAL |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 196.0 |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 118.5 |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | 8.774 INCHES MINIMUM AND 8.788 INCHES MAXIMUM |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | 9.774 INCHES MINIMUM AND 9.778 INCHES MAXIMUM |
| BCMG | TOP MOUNTING HOLE DIAMETER | 0.401 INCHES MINIMUM AND 0.411 INCHES MAXIMUM |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | 0.526 INCHES MINIMUM AND 0.536 INCHES MAXIMUM |
| BCND | MAXIMUM RATED ARMATURE SPEED IN RPM | 5000 |
| BZRR | THREAD SERIES | UNF |
| CFHL | THREAD CLASS | 2A |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| ELEC | VOLTAGE IN VOLTS | 12.0 |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
