Welcome to our online Request for Quote (RFQ) service, where you can fill out and submit the form provided below to obtain tailored procurement options from our team of industry experts. You have taken interest in part number 88P914 LR1EL, which is a Bearing Fan And Water Pump item from General Motors Corp that is listed with the NSN 3110-01-173-3724 for quick identification. Should you wish to move forward with quotation for this listing, be sure that you supply us with key details like your target pricing, quality, and delivery date. This information is what we will base presented quotes on, with responses offered shortly after the receipt and review of each form.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that customers only procure exact items of need, we present our offerings with as much relevant data as possible. For example, part number 88P914 LR1EL was specifically produced by General Motors Corp under the CAGE Code 43334, providing traceability. Furthermore, with the NSN 3110-01-173-3724, one can also determine that this listing falls under Federal Supply Class (FSC) 3110 Bearings Antifriction Unmounted. Alongside such details, all purchases will come delivered with any applicable qualifying certifications, furthering the reliability of our purchasing options. With this in mind, be sure to request a quote on part number 88P914 LR1EL, and we will be in touch.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-01-173-3724 Item PartTypeName: BEARING,FAN AND WATER PUMP | 3110 | 011733724 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 88P914 LR1EL | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 2B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABHP | OVERALL LENGTH | 5.8420 INCHES MINIMUM AND 5.8720 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 1.8745 INCHES MINIMUM AND 1.8750 INCHES MAXIMUM |
| ADZG | LUBRICATION MATERIAL | GREASE |
| AGWB | SHORT END SHAFT LENGTH | 1.0940 INCHES MINIMUM AND 1.1240 INCHES MAXIMUM |
| AGWC | LONG END SHAFT LENGTH | 1.9630 INCHES MINIMUM AND 2.0330 INCHES MAXIMUM |
| AGWD | SHORT END SHAFT DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| AGWE | LONG END SHAFT DIAMETER | 0.6262 INCHES MINIMUM AND 0.6267 INCHES MAXIMUM |
| AGYF | RETAINER FABRICATION METHOD | MOLDED |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | RIGID |
| AKVV | INTERNAL CLEARANCE | 0.0003 INCHES MINIMUM RADIAL AND 0.0011 INCHES MAXIMUM RADIAL |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQJX | NOMINAL THREAD SIZE | 0.500 INCHES |
| FEAT | SPECIAL FEATURES | SHORT SHAFT END TAPERED 1.5000 IN. PER FT AND INTERNALLY THREAD WITH A 1.0000 IN. MIN THD LG; 7 GM MIN,8 GM MAX OF NLG13 GREASE OR 45 PCT FULL OF GM9985371 GREASE; PRESSED FABRICATION METHOD IF STEEL RETAINER |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | NLG13,FSCM 10988 MFR REF SINGLE MATERIAL RESPONSE OR 9985371,FSCM 24617 MFR REF SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | PLASTIC POLYHEXAMETHYLENE ADIPAMIDE RETAINER OR STEEL RETAINER |
| MATT | MATERIAL | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEAL |
| MATT | MATERIAL | STEEL BALL |
| MATT | MATERIAL | STEEL OUTER RING |
| MATT | MATERIAL | STEEL SHAFT |
| STYL | STYLE DESIGNATOR | FAN AND WATER PUMP BALL TYPE |
| THSD | THREAD SERIES DESIGNATOR | UNF |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
