Welcome to our online Request for Quote (RFQ) service, where you can fill out and submit the form provided below to obtain tailored procurement options from our team of industry experts. You have taken interest in part number SPS2201T, which is a Shaft Assembly Flex item from General Motors Corp that is listed with the NSN 6680-00-798-7296 for quick identification. Should you wish to move forward with quotation for this listing, be sure that you supply us with key details like your target pricing, quality, and delivery date. This information is what we will base presented quotes on, with responses offered shortly after the receipt and review of each form.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that customers only procure exact items of need, we present our offerings with as much relevant data as possible. For example, part number SPS2201T was specifically produced by General Motors Corp under the CAGE Code 7X677, providing traceability. Furthermore, with the NSN 6680-00-798-7296, one can also determine that this listing falls under Federal Supply Class (FSC) 6680 Liquid And Gas Flow Liquid Level And Mechanical Motion Measuring Instruments. Alongside such details, all purchases will come delivered with any applicable qualifying certifications, furthering the reliability of our purchasing options. With this in mind, be sure to request a quote on part number SPS2201T, and we will be in touch.
| MRC | Criteria | Characteristic |
|---|---|---|
| CFSL | CORE REMOVABILITY | REMOVABLE |
| AAJF | THREAD DIRECTION | RIGHT-HAND BOTH ENDS |
| BPPL | WRENCHING FACILITY TYPE | HEXAGON BOTH ENDS |
| AJXJ | CORE MATERIAL | STEEL |
| BDRL | SETSCREW | NOT INCLUDED BOTH ENDS |
| BJPS | CASING MATERIAL | STEEL |
| AKMH | CORE DIAMETER | 0.150 INCHES NOMINAL |
| CFRT | SWIVEL END | NOT PROVIDED BOTH ENDS |
| CFRY | LUBRICATION FITTING | NOT PROVIDED BOTH ENDS |
| CFRR | CASING PROTECTIVE DEVICE TYPE | RUBBER COVER |
| ZZZV | III FSC APPLICATION DATA | SPEEDOMETER,CARRIER,PERSONNEL |
| ASDB | WIDTH ACROSS FLATS | 1.000 INCHES NOMINAL FIRST END 0.750 INCHES NOMINAL SECOND END |
| APTD | END TYPE | ROUND KEYED FIRST END SQUARE MALE SECOND END |
| CFRP | CASING LENGTH BETWEEN FERRULES | 64.937 INCHES MINIMUM AND 65.063 INCHES MAXIMUM |
| ABUJ | (NON-CORE DATA) THREAD SIZE | 7/8-18 5/8-18 |
| FEAT | SPECIAL FEATURES | COUNTERCLOCKWISE CORE ROTATION DIRECTION |
| AKMF | CORE SURFACE TREATMENT | ZINC COATED |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNS FIRST END UNF SECOND END |
| AWZY | END CONNECTION TYPE | THREADED INTERNAL BOTH ENDS |
| CFRZ | CORE OVERALL LENGTH | 66.047 INCHES MINIMUM AND 66.359 INCHES MAXIMUM |
| CFRN | CASING SURFACE TREATMENT | CADMIUM PLATED |
| CFRQ | CASING OUTSIDE DIAMETER | 0.688 INCHES NOMINAL |
| CFRX | OVERALL END SIZE | FIRST END: 1.188 IN. W; SECOND END: 0.875 IN. W |
| CFSB | CORE ROTATION DIRECTION | CLOCKWISE |
| ABHP | OVERALL LENGTH | 66.078 INCHES MINIMUM AND 66.391 INCHES MAXIMUM |
| CFSM | (NON-CORE DATA) STRENGTH RATING CHARACTERISTICS | 15.0 POUNDS TORSION STRENGTH EITHER DIRECTION |
| CFQW | CROSS SECTION SIZE AND LOCATION | 0.150 INCHES MINIMUM DIAMETER AND 0.153 INCHES MAXIMUM DIAMETER FIRST END 0.101 INCHES MINIMUM ACROSS FLATS AND 0.104 INCHES MAXIMUM ACROSS FLATS SECOND END |
| AAJD | THREAD CLASS | 2B BOTH ENDS |
| AECT | THREAD DEPTH | 0.327 INCHES NOMINAL FIRST END 0.375 INCHES NOMINAL SECOND END |
| AEDN | TIP LENGTH | 0.734 INCHES MINIMUM AND 0.922 INCHES MAXIMUM FIRST END 0.375 INCHES NOMINAL SECOND END |
| APJC | THREAD LOCATION | INTERNAL BOTH ENDS |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
