Welcome to our online Request for Quote (RFQ) service, where you can fill out and submit the form provided below to obtain tailored procurement options from our team of industry experts. You have taken interest in part number N29578PCA, which is a Gear Helical item from Hatch And Kirk Inc that is listed with the NSN 3020-00-391-0927 for quick identification. Should you wish to move forward with quotation for this listing, be sure that you supply us with key details like your target pricing, quality, and delivery date. This information is what we will base presented quotes on, with responses offered shortly after the receipt and review of each form.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that customers only procure exact items of need, we present our offerings with as much relevant data as possible. For example, part number N29578PCA was specifically produced by Hatch And Kirk Inc under the CAGE Code 55380, providing traceability. Furthermore, with the NSN 3020-00-391-0927, one can also determine that this listing falls under Federal Supply Class (FSC) 3020 Gear Pulley Sprocket and Transmission Chain. Alongside such details, all purchases will come delivered with any applicable qualifying certifications, furthering the reliability of our purchasing options. With this in mind, be sure to request a quote on part number N29578PCA, and we will be in touch.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-391-0927 Item PartTypeName: GEAR,HELICAL | 3020 | 003910927 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| N29978PCA | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | WEBBED,WITH LIGHTENING HOLES |
| AGJS | PITCH DIAMETER | 10.8000 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 54 |
| ANTP | BORE STYLE | PLAIN BOTH ENDS |
| CQFM | HARDNESS RATING | 10.0 ROCKWELL C MINIMUM OVERALL AND 20.0 ROCKWELL C MAXIMUM OVERALL |
| CWCD | NOMINAL OUTSIDE DIAMETER | 11.084 INCHES |
| CWMW | TEETH TYPE | SINGLE HELIX |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | LEFT |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWPZ | HELIX ANGLE | 27.3217 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.688 INCHES BOTH ENDS |
| CWRM | FACE NOMINAL WIDTH | 2.000 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 2.0000 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | 1 STEP BOTH ENDS |
| CWWH | END NOMINAL LENGTH | 1.375 INCHES BOTH ENDS |
| CWWN | END NOMINAL DIAMETER | 2.997 INCHES BOTH ENDS |
| CWWS | FIRST STEP NOMINAL LENGTH | 0.063 INCHES BOTH ENDS |
| CWXB | FIRST STEP NOMINAL DIAMETER | 4.125 INCHES BOTH ENDS |
| FEAT | SPECIAL FEATURES | TWO COUNTERWEIGHTS,BOLTS,NUTS,OIL HOLES IN HUB,FIG 1 STAMPED BETWEEN TEETH ON SIDE OF GEAR 170 DEG 57 MIN CCW FROM UPPER CENTER LINE,FIG 4 STAMPED BETWEEN TEETH ON SIDE OF GEAR 73 DEG 20 MIN CCW FROM FIG 1 |
| MATT | MATERIAL | STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-890,CLASS B MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | PROTRUDING HUBS |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
