Welcome to our online Request for Quote (RFQ) service, where you can fill out and submit the form provided below to obtain tailored procurement options from our team of industry experts. You have taken interest in part number H330044P01, which is a Sleeve Shaft Pump item from Howden Fluid Systems that is listed with the NSN 4320-01-176-2043 for quick identification. Should you wish to move forward with quotation for this listing, be sure that you supply us with key details like your target pricing, quality, and delivery date. This information is what we will base presented quotes on, with responses offered shortly after the receipt and review of each form.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that customers only procure exact items of need, we present our offerings with as much relevant data as possible. For example, part number H330044P01 was specifically produced by Howden Fluid Systems under the CAGE Code 33654, providing traceability. Furthermore, with the NSN 4320-01-176-2043, one can also determine that this listing falls under Federal Supply Class (FSC) 4320 Power And Hand Pumps. Alongside such details, all purchases will come delivered with any applicable qualifying certifications, furthering the reliability of our purchasing options. With this in mind, be sure to request a quote on part number H330044P01, and we will be in touch.
| MRC | Criteria | Characteristic |
|---|---|---|
| SFTT | SURFACE TREATMENT | ANODIZE INSIDE DIAMETER SURFACE OF BODY CHROMATE LEFT END SURFACE OF BODY AND FLANGE CHROMATE RIGHT END SURFACE OF BODY |
| SR-5 | MANUFACTURERS CODE | 58163 |
| ADAS | BODY INSIDE DIAMETER | 0.8000 INCHES MINIMUM AND 0.8020 INCHES MAXIMUM |
| CSYT | (NON-CORE DATA) CHAMFER ANGLE | 45.0 DEGREES NOMINAL 45.0 DEGREES NOMINAL |
| AAZP | (NON-CORE DATA) CHAMFER LENGTH | 0.0250 INCHES MINIMUM AND 0.0300 INCHES MAXIMUM 0.0570 INCHES MINIMUM AND 0.0600 INCHES MAXIMUM |
| AGFF | FLANGE WIDTH | 0.2300 INCHES MINIMUM AND 0.2600 INCHES MAXIMUM |
| MATT | MATERIAL | ALUMINUM ALLOY 6061 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/8 FED SPEC ALL MATERIAL RESPONSES OVERALL |
| STYL | STYLE DESIGNATOR | SOLID |
| AGAV | III END ITEM IDENTIFICATION | F-16 ACFT |
| AEPR | FLANGE OUTSIDE DIAMETER | 1.0600 INCHES MINIMUM AND 1.0700 INCHES MAXIMUM |
| BZLX | CORNER SHAPE | SQUARE OUTSIDE LEFT CORNER CHAMFERED OUTSIDE RIGHT CORNER SQUARE INSIDE RIGHT CORNER CHAMFERED INSIDE LEFT CORNER ROUND LEFT FLANGE OUTSIDE RIGHT CORNER ROUND LEFT FLANGE BODY CORNER |
| ABGG | (NON-CORE DATA) RADIUS | 0.0600 INCHES NOMINAL 0.0600 INCHES NOMINAL |
| SR-5 | THE MANUFACTURERS DATA | |
| SR-5 | DESIGN CONTROL REFERENCE | H330044P01 |
| FEAT | SPECIAL FEATURES | ONE GROVE 0.210 IN. W BY 0.055 IN. DP 0.750 IN. FROM 1ST END,0.020 IN. RADIUS GROVE BOTTOM CORNERS; TWELVE EQUALLY SPACED 0.035 IN. W BY 0.094 IN. DP SLOTS ON 1ST END FACE |
| ABHP | OVERALL LENGTH | 2.1870 INCHES NOMINAL |
| ADAR | BODY OUTSIDE DIAMETER | 1.0500 INCHES MINIMUM AND 1.0510 INCHES MAXIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE 3 CLASS 1 MIL SPEC 2ND TREATMENT RESPONSE INSIDE DIAMETER SURFACE OF BODY MIL-A-8625,TYPE 1 CLASS 1 MIL SPEC 1ST TREATMENT RESPONSE LEFT END SURFACE OF BODY AND FLANGE MIL-A-8625,TYPE 1 CLASS 1 MIL SPEC 3RD TREATMENT RESPONSE RIGHT END SURFACE OF BODY |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
