Welcome to our online Request for Quote (RFQ) service, where you can fill out and submit the form provided below to obtain tailored procurement options from our team of industry experts. You have taken interest in part number 2520PL0839479, which is a Shaft Axle Automotive item from Inspektorat Wsparcia Sil Zbrojnych that is listed with the NSN 2520-01-474-3901 for quick identification. Should you wish to move forward with quotation for this listing, be sure that you supply us with key details like your target pricing, quality, and delivery date. This information is what we will base presented quotes on, with responses offered shortly after the receipt and review of each form.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that customers only procure exact items of need, we present our offerings with as much relevant data as possible. For example, part number 2520PL0839479 was specifically produced by Inspektorat Wsparcia Sil Zbrojnych under the CAGE Code 9009H, providing traceability. Furthermore, with the NSN 2520-01-474-3901, one can also determine that this listing falls under Federal Supply Class (FSC) 2520 Vehicle Power Transmission Components. Alongside such details, all purchases will come delivered with any applicable qualifying certifications, furthering the reliability of our purchasing options. With this in mind, be sure to request a quote on part number 2520PL0839479, and we will be in touch.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2520-01-474-3901 Item PartTypeName: SHAFT,AXLE,AUTOMOTIVE | 2520 | 014743901 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| EX4855-2 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAUB | HOLE DIAMETER | 0.430 INCHES MINIMUM AND 0.450 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 29.770 INCHES MINIMUM AND 30.240 INCHES MAXIMUM |
| AGAV | END ITEM IDENTIFICATION | NSN 2320-01-412-0143 TRUCK, UTILITY - HUM-V |
| AHTC | FLANGE OUTSIDE DIAMETER | 2.948 INCHES MINIMUM AND 2.952 INCHES MAXIMUM |
| AMDM | FIRST END SPLINE LENGTH | 3.210 INCHES MINIMUM AND 3.250 INCHES MAXIMUM |
| AMGA | SECOND END SPLINE LENGTH | 3.210 INCHES MINIMUM AND 3.250 INCHES MAXIMUM |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 1.282 INCHES NOMINAL |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 1.375 INCHES NOMINAL |
| AMGF | SECOND END PITCH DIAMETER | 0.071 INCHES MINIMUM AND 0.073 INCHES MAXIMUM |
| AMHF | SECOND END GEAR OUTSIDE DIAMETER | 1.375 INCHES NOMINAL |
| AMQA | FIRST END TYPE | FLANGED |
| AMQF | SECOND END TYPE | SPLINED |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 6 UNTHREADED HOLE |
| BNTH | SECOND END GEAR TEETH QUANTITY | 32 |
| BNTJ | SECOND END GEAR TEETH PRESSURE ANGLE IN DEG | 45.0 |
| BNTM | SECOND END SPLINE TYPE | INVOLUTE |
| BNTN | SECOND END SPLINE PRESSURE ANGLE IN DEG | 45.0 |
| BNYS | FLANGE OVERALL THICKNESS | 0.303 INCHES MINIMUM AND 0.355 INCHES MAXIMUM |
| BNYT | FLANGE THICKNESS AT MOUNTING HOLE | 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| FEAT | SPECIAL FEATURES | ITEM FOR RIGHT HAND ONLY; SURFACE HARDNESS ROCKWELL C 58-63 - CORE HARDNESS ROCKWELL C 35 MAX; MAT'L FOR BOOT CLAMP - STAINLESS STEEL, TYPE 304 IAW ASTM A167 |
| AAUB | HOLE DIAMETER | 0.430 INCHES MINIMUM AND 0.450 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 29.770 INCHES MINIMUM AND 30.240 INCHES MAXIMUM |
| AGAV | END ITEM IDENTIFICATION | NSN 2320-01-412-0143 TRUCK, UTILITY - HUM-V |
| AHTC | FLANGE OUTSIDE DIAMETER | 2.948 INCHES MINIMUM AND 2.952 INCHES MAXIMUM |
| AMDM | FIRST END SPLINE LENGTH | 3.210 INCHES MINIMUM AND 3.250 INCHES MAXIMUM |
| AMGA | SECOND END SPLINE LENGTH | 3.210 INCHES MINIMUM AND 3.250 INCHES MAXIMUM |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 1.282 INCHES NOMINAL |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 1.375 INCHES NOMINAL |
| AMGF | SECOND END PITCH DIAMETER | 0.071 INCHES MINIMUM AND 0.073 INCHES MAXIMUM |
| AMHF | SECOND END GEAR OUTSIDE DIAMETER | 1.375 INCHES NOMINAL |
| AMQA | FIRST END TYPE | FLANGED |
| AMQF | SECOND END TYPE | SPLINED |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 6 UNTHREADED HOLE |
| BNTH | SECOND END GEAR TEETH QUANTITY | 32 |
| BNTJ | SECOND END GEAR TEETH PRESSURE ANGLE IN DEG | 45.0 |
| BNTM | SECOND END SPLINE TYPE | INVOLUTE |
| BNTN | SECOND END SPLINE PRESSURE ANGLE IN DEG | 45.0 |
| BNYS | FLANGE OVERALL THICKNESS | 0.303 INCHES MINIMUM AND 0.355 INCHES MAXIMUM |
| BNYT | FLANGE THICKNESS AT MOUNTING HOLE | 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| FEAT | SPECIAL FEATURES | ITEM FOR RIGHT HAND ONLY; SURFACE HARDNESS ROCKWELL C 58-63 - CORE HARDNESS ROCKWELL C 35 MAX; MAT'L FOR BOOT CLAMP - STAINLESS STEEL, TYPE 304 IAW ASTM A167 |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
