Welcome to our online Request for Quote (RFQ) service, where you can fill out and submit the form provided below to obtain tailored procurement options from our team of industry experts. You have taken interest in part number 13084019, which is a Bearing Ball Duplex item from Kaydon Ring And Seal Inc that is listed with the NSN 3110-01-186-5522 for quick identification. Should you wish to move forward with quotation for this listing, be sure that you supply us with key details like your target pricing, quality, and delivery date. This information is what we will base presented quotes on, with responses offered shortly after the receipt and review of each form.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that customers only procure exact items of need, we present our offerings with as much relevant data as possible. For example, part number 13084019 was specifically produced by Kaydon Ring And Seal Inc under the CAGE Code 32828, providing traceability. Furthermore, with the NSN 3110-01-186-5522, one can also determine that this listing falls under Federal Supply Class (FSC) 3110 Bearings Antifriction Unmounted. Alongside such details, all purchases will come delivered with any applicable qualifying certifications, furthering the reliability of our purchasing options. With this in mind, be sure to request a quote on part number 13084019, and we will be in touch.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-01-186-5522 Item PartTypeName: BEARING,BALL,DUPLEX | 3110 | 011865522 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 13084019 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABMK | OVERALL WIDTH | 0.8350 INCHES MINIMUM AND 0.8450 INCHES MAXIMUM |
| ABXV | BORE DIAMETER | 8.9993 INCHES MINIMUM AND 9.0000 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 9.7493 INCHES MINIMUM AND 9.7500 INCHES MAXIMUM |
| ADZG | LUBRICATION MATERIAL | OIL |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | MACHINED |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | LIPS TURNED INWARDLY |
| AGZC | LOAD DIRECTION | ANGULAR |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.3 |
| CTHQ | BEARING PRELOAD RATING | 720.0 POUNDS MINIMUM AND 880.0 POUNDS MAXIMUM |
| CTHY | CONTACT ANGLE | 30.0 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | PASSIVATE,QQ-P-35,RINGS AND BALLS; 20 DROPS OF SPECIFIED LUBRICANT FROMNO. 26 HYPODERMIC NEEDLE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | PLASTIC PHENOLIC RETAINER |
| MATT | MATERIAL | RUBBER CHLOROPRENE CLASS CR SEAL |
| MATT | MATERIAL | STEEL COMP 440C BALL |
| MATT | MATERIAL | STEEL COMP 440C INNER RING |
| MATT | MATERIAL | STEEL COMP 440C OUTER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE BALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE INNER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OUTER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-79,FORM T,TYPE FBE MIL SPEC SINGLE MATERIAL RESPONSE RETAINER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-R-6855,CLASS 2,TYPE A MIL SPEC SINGLE MATERIAL RESPONSE SEAL |
| STYL | STYLE DESIGNATOR | COUNTERBORED OUTER RINGS,NON-SEPARABLE,BACK TO BACK MOUNTING |
| ZZZK | SPECIFICATION/STANDARD DATA | 58260-13084019 GOVERNMENT SPECIFICATION |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
