Welcome to our online Request for Quote (RFQ) service, where you can fill out and submit the form provided below to obtain tailored procurement options from our team of industry experts. You have taken interest in part number 7627969P001, which is a Synchro Control Transformer item from Lockheed Martin Corporation that is listed with the NSN 5990-00-078-3182 for quick identification. Should you wish to move forward with quotation for this listing, be sure that you supply us with key details like your target pricing, quality, and delivery date. This information is what we will base presented quotes on, with responses offered shortly after the receipt and review of each form.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that customers only procure exact items of need, we present our offerings with as much relevant data as possible. For example, part number 7627969P001 was specifically produced by Lockheed Martin Corporation under the CAGE Code 03538, providing traceability. Furthermore, with the NSN 5990-00-078-3182, one can also determine that this listing falls under Federal Supply Class (FSC) 5990 Synchros and Resolvers. Alongside such details, all purchases will come delivered with any applicable qualifying certifications, furthering the reliability of our purchasing options. With this in mind, be sure to request a quote on part number 7627969P001, and we will be in touch.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-00-078-3182 Item PartTypeName: SYNCHRO,CONTROL TRANSFORMER | 5990 | 000783182 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 7627969P001 | C | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAFZ | BODY MATERIAL | STEEL,CORROSION RESISTING |
| AAQL | BODY STYLE | STANDARD ROUND C |
| AAVH | SHOULDER DIAMETER | 1.5615 INCHES MINIMUM AND 1.5620 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.9370 INCHES MINIMUM AND 0.9375 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 3.0620 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 1.7470 INCHES MINIMUM AND 1.7500 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0900 INCHES MINIMUM AND 0.0960 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 1.6220 INCHES MINIMUM AND 1.6280 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0780 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.1870 INCHES MINIMUM SINGLE SHAFT AND 0.1872 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.3790 INCHES MINIMUM SINGLE SHAFT AND 0.3870 INCHES MAXIMUM SINGLE SHAFT |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | 1 Y-ROTOR,1 STATOR |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | BODY SIZE | 18 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 90.0 NOMINAL |
| AJSP | STATOR INPUT CURRENT RATING | 7.0 MILLIAMPERES MAXIMUM |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | 100.0 MILLIWATTS MAXIMUM |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | 13000.00 NOMINAL |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | 88.00 NOMINAL |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 420.00 NOMINAL |
| AJTT | STATOR DC RESISTANCE IN OHMS | 675.00 NOMINAL |
| AJVF | PHASE SHIFT ANGLE IN DEG | 3.000 INPUT TO OUTPUT NOMINAL |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 30.00 OUTPUT |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 45.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -6.0/6.0 |
| AJVM | SPLINE TOOTH QUANTITY | 21 SINGLE SHAFT |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 0.10 INCH-OUNCES MAXIMUM |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWE | SHAFT RADIAL PLAY TEST POINT | 0.125 INCHES MAXIMUM |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | 0.0008 INCHES |
| AJWH | SHAFT END PLAY | 0.0030 INCHES MAXIMUM |
| AJWQ | PILOT LENGTH | 0.0370 NOMINAL MILS AND 0.0430 NOMINAL CENTIMETERS |
| AJWR | SHOULDER LENGTH | 0.1290 NOMINAL MILS AND 0.1350 NOMINAL CENTIMETERS |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 2.5230 INCHES MAXIMUM |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 120 SINGLE SHAFT |
| AJXB | SHAFT MAXIMUM RUNOUT | 0.0008 INCHES |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| AKAF | SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| AKAN | SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | 0.3550 INCHES MAXIMUM SINGLE SHAFT |
| CRSJ | SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| CRSY | ALIGNMENT HOLE DEPTH | 0.1250 INCHES MINIMUM |
| CSJY | TRANSFORMATION RATIO | 0.735 ROTOR TO STATOR NOMINAL |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 1.2500 INCHES NOMINAL |
| CWBH | SHAFT NOMINAL THREAD SIZE | 0.190 INCHES SINGLE SHAFT |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | 16.0 OUNCES |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | 16.0 OUNCES |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 SCREW |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
