Welcome to our online Request for Quote (RFQ) service, where you can fill out and submit the form provided below to obtain tailored procurement options from our team of industry experts. You have taken interest in part number 8BX-25, which is a Hose Assembly Nonmetallic item from Macgregor Sweden Ab that is listed with the NSN 4720-01-426-4987 for quick identification. Should you wish to move forward with quotation for this listing, be sure that you supply us with key details like your target pricing, quality, and delivery date. This information is what we will base presented quotes on, with responses offered shortly after the receipt and review of each form.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that customers only procure exact items of need, we present our offerings with as much relevant data as possible. For example, part number 8BX-25 was specifically produced by Macgregor Sweden Ab under the CAGE Code A236N, providing traceability. Furthermore, with the NSN 4720-01-426-4987, one can also determine that this listing falls under Federal Supply Class (FSC) 4720 Hose and Tubing Flexible. Alongside such details, all purchases will come delivered with any applicable qualifying certifications, furthering the reliability of our purchasing options. With this in mind, be sure to request a quote on part number 8BX-25, and we will be in touch.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-426-4987 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 014264987 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 8BX-25 | 2 | C | 1 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | Thread Class | 3B 1ST END |
| CQCS | Layer Composition And Location | 1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| CQRB | Seat Angle | 37.0 DEGREES 1ST END |
| CRWL | Inside Surface Condition | SMOOTH |
| CQGM | Maximum Operating Pressure | 3500.0 POUNDS PER SQUARE INCH |
| AAJF | Thread Direction | RIGHT-HAND 2ND END |
| CRDW | Hydrostatic Test Pressure | 7000.0 POUNDS PER SQUARE INCH |
| AAJF | Thread Direction | RIGHT-HAND 1ST END |
| AAJD | Thread Class | 3A 2ND END |
| AKUU | End Connection Design | STRAIGHT 1ST END |
| AKUU | End Connection Design | STRAIGHT 2ND END |
| THSD | Thread Series Designator | UNJF 2ND END |
| CRXX | Measuring Method And Length | 25.000 INCHES NOMINAL OVERALL |
| THSD | Thread Series Designator | UNJ 1ST END |
| CQBD | Burst Test Pressure | 14000.0 POUNDS PER SQUARE INCH |
| AWLS | Connection Type | THREADED INTERNAL TUBE 1ST END |
| ABKV | Outside Diameter | 0.870 INCHES NOMINAL |
| AWLS | Connection Type | THREADED EXTERNAL BOSS 2ND END |
| CRJM | Outer Covering Environmental Protection | OIL RESISTANT AND WEATHERPROOF |
| MRC | Decoded Requirement | Clear Text Reply |
| AARX | Inside Diameter | 0.500 INCHES NOMINAL |
| AHNC | Connection Style | EXTERNAL SEAT FOR GASKET SEAL (BOSS) 2ND END |
| ACKH | Minimum Inside Bending Radius | 7.000 INCHES |
| AGAV | End Item Identification | USED ON STRATEGIC SEALIFT CONVERSION SHIPS CLASS |
| CQJX | Nominal Thread Size | 0.750 INCHES 2ND END |
| CQJX | Nominal Thread Size | 0.875 INCHES 1ST END |
| AAGR | Cross-Sectional Shape Style | ROUND |
| AHNC | Connection Style | SWIVEL NUT FLARE 1ST END |
| ABJH | Temp Rating | -40.0 DEG FAHRENHEIT AND 212.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CMLP | Thread Quantity Per Inch | 14 1ST END |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
