Welcome to our online Request for Quote (RFQ) service, where you can fill out and submit the form provided below to obtain tailored procurement options from our team of industry experts. You have taken interest in part number 9019-6.4.1, which is a Hose Assembly Nonmetallic item from Maritime Tanksystems International that is listed with the NSN 4720-01-431-1355 for quick identification. Should you wish to move forward with quotation for this listing, be sure that you supply us with key details like your target pricing, quality, and delivery date. This information is what we will base presented quotes on, with responses offered shortly after the receipt and review of each form.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that customers only procure exact items of need, we present our offerings with as much relevant data as possible. For example, part number 9019-6.4.1 was specifically produced by Maritime Tanksystems International under the CAGE Code 0W0U5, providing traceability. Furthermore, with the NSN 4720-01-431-1355, one can also determine that this listing falls under Federal Supply Class (FSC) 4720 Hose and Tubing Flexible. Alongside such details, all purchases will come delivered with any applicable qualifying certifications, furthering the reliability of our purchasing options. With this in mind, be sure to request a quote on part number 9019-6.4.1, and we will be in touch.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-431-1355 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 014311355 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 78C-6N-6N-20-24 | 2 | 1 | C | A |
| MRC | Criteria | Characteristic |
|---|---|---|
| AARX | Inside Diameter | 1.250 INCHES NOMINAL |
| AGAV | End Item Identification | USED ON THE STRATEGIC SEALIFT CONVERSION SHIPS CLASS |
| ABKU | Flange Thickness | 0.405 INCHES NOMINAL 1ST END |
| ABKV | Outside Diameter | 1.960 INCHES NOMINAL |
| MRC | Decoded Requirement | Clear Text Reply |
| CQCS | Layer Composition And Location | 2ND LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| CQCS | Layer Composition And Location | OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| CQGM | Maximum Operating Pressure | 5000.0 POUNDS PER SQUARE INCH |
| AKUT | End Flange Construction | SPLIT 1ST END |
| AKUU | End Connection Design | ELBOW 2ND END |
| ADJS | Exterior Color | RED |
| AKUT | End Flange Construction | SPLIT 2ND END |
| AKUU | End Connection Design | ELBOW 1ST END |
| CRDW | Hydrostatic Test Pressure | 10000.0 POUNDS PER SQUARE INCH |
| CRXX | Measuring Method And Length | 24.000 INCHES NOMINAL OVERALL |
| ZZZK | Specification/Standard Data | SAE J517, 100R13, 81343 NATIONAL STD/SPEC |
| AKXL | End Fitting Component And Material | COMPLETE FITTING STEEL ALL ENDS |
| AWLS | Connection Type | PLAIN FACE FLANGE 2ND END |
| CRFY | Flow Angle | 90.0 DEGREES 2ND END |
| CRFY | Flow Angle | 90.0 DEGREES 1ST END |
| AWLS | Connection Type | PLAIN FACE FLANGE 1ST END |
| ABKU | Flange Thickness | 0.495 INCHES NOMINAL 2ND END |
| AEPR | Flange Outside Diameter | 2.125 INCHES NOMINAL 1ST END |
| ACKH | Minimum Inside Bending Radius | 16.500 INCHES |
| ABJH | Temp Rating | -40.0 DEG FAHRENHEIT AND 257.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CQBD | Burst Test Pressure | 20000.0 POUNDS PER SQUARE INCH |
| CRWL | Inside Surface Condition | SMOOTH |
| CTCJ | Flange Style | ROUND W/ OUT BOLT HOLES 1ST END |
| CTCJ | Flange Style | ROUND W/ OUT BOLT HOLES 2ND END |
| AHNC | Connection Style | PLAIN SWIVEL W/ GASKET GROOVE 1ST END |
| AAGR | Cross-Sectional Shape Style | ROUND |
| MEDA | Media For Which Designed | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| CQCS | Layer Composition And Location | 3RD LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| AEPR | Flange Outside Diameter | 2.500 INCHES NOMINAL 2ND END |
| FEAT | Special Features | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| AHNC | Connection Style | PLAIN SWIVEL W/ GASKET GROOVE 2ND END |
| CQCS | Layer Composition And Location | 4TH LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| CQCS | Layer Composition And Location | 1ST LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| ADKX | Angle Between Rigid Elbow Fittings In Deg | 270 |
| CQCS | Layer Composition And Location | 6TH LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| CQCS | Layer Composition And Location | 5TH LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
