Welcome to our online Request for Quote (RFQ) service, where you can fill out and submit the form provided below to obtain tailored procurement options from our team of industry experts. You have taken interest in part number 1334-MIL, which is a Lathe Engine item from Omatech Service Ltd that is listed with the NSN 3416-01-030-8195 for quick identification. Should you wish to move forward with quotation for this listing, be sure that you supply us with key details like your target pricing, quality, and delivery date. This information is what we will base presented quotes on, with responses offered shortly after the receipt and review of each form.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that customers only procure exact items of need, we present our offerings with as much relevant data as possible. For example, part number 1334-MIL was specifically produced by Omatech Service Ltd under the CAGE Code 0B6Z5, providing traceability. Furthermore, with the NSN 3416-01-030-8195, one can also determine that this listing falls under Federal Supply Class (FSC) 3416 Lathes. Alongside such details, all purchases will come delivered with any applicable qualifying certifications, furthering the reliability of our purchasing options. With this in mind, be sure to request a quote on part number 1334-MIL, and we will be in touch.
| MRC | Criteria | Characteristic |
|---|---|---|
| ELEC | Voltage In Volts | 115.0 AND 230.0 |
| AGLD | Performance Type | STANDARD DUTY |
| MRC | Decoded Requirement | Clear Text Reply |
| FAAZ | Phase | SINGLE |
| AWHA | Bed Type | SOLID |
| ACDC | Current Type | AC |
| AKSL | Purpose For Which Designed | GENERAL |
| FREQ | Frequency In Hertz | 60 |
| BTTF | Actual Swing Over Bed | 13.000 INCHES NOMINAL |
| BTYP | Hole Diameter Through Spindle | 1.375 INCHES NOMINAL |
| BTYW | Gear Change Type | QUICK |
| AAXX | Mounting Type | FLOOR |
| ADQR | Center To Center Distance | 30.000 INCHES MINIMUM |
| AKYD | Accessory Components And Quantity | 2 NO.3 MORSE TAPER LATHE CENTERS,3 CHUCKS,1 FLEXIBLE RUBBER COLLET SET,5 BENT TAIL DOG LATHES,1 DOG LATHE,1 DRIVE PLATE,1 FACEPLATE,1 METRIC TRANSPOSING GEAR LATHE,1 BORING BAR CUTTING TOOL HOLDER,3 CUTTING-OFF CUTTING TOOL HOLDERS,3 TURNING CUTTING TOOL HOLDERS,1 V-FORM THREADING TOOL HOLDER,1 KNURLING TOOLS,4 COLLET PLUGS,2 LATHE RESTS,1 LATHE CENTER SLEEVE,1 MICROMETER LATHE CARRIAGE STOP,1 TELESCOPIC LATHE TAPEP ATTACHMENT |
| FEAT | Special Features | 1400 LBS.MAX NET WT OF LATHE; FLOOR CABINET DESIGNED FOR STOWAGE OF ALL ACCESSORIES |
| APGF | Design Type | SCREW |
| BTTD | Rated Swing | 13.000 INCHES NOMINAL |
| BTTG | Swing Over Cross Slide | 7.750 INCHES NOMINAL |
| BTWM | Headstock Center Taper Size Designator | 3 MORSE |
| BTYQ | Carriage Quantity | 1 |
| BTYT | Carriage Feed Change Quantity | 48 |
| BTZR | Thread Quantity Range | +4.0/+80.0 PER INCH |
| BTSZ | Spindle Speed Quantity | 12 |
| BTTB | Spindle Speed Range In Rpm | 0.029444444 |
| BTWB | Thread Change Quantity | 48 |
| BTWL | Headstock Drive Type | STEP CONE PULLEY, BACK GEARED |
| BTYR | Carriage Longitudinal Feed Operation Method | HAND AND POWER |
| BTYS | Carriage Cross Feed Operation Method | HAND AND POWER |
| AWLX | Electric Motor Quantity | 1 |
| ASHK | Electric Motor Horsepower Rating | 1.5 |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
