Welcome to our online Request for Quote (RFQ) service, where you can fill out and submit the form provided below to obtain tailored procurement options from our team of industry experts. You have taken interest in part number 20708 7C-001, which is a Synchro Control Transformer item from Smiths Aerospace Inc that is listed with the NSN 5990-00-341-3194 for quick identification. Should you wish to move forward with quotation for this listing, be sure that you supply us with key details like your target pricing, quality, and delivery date. This information is what we will base presented quotes on, with responses offered shortly after the receipt and review of each form.
Note : We Will Not Share Your Information To Any Third Parties.
To ensure that customers only procure exact items of need, we present our offerings with as much relevant data as possible. For example, part number 20708 7C-001 was specifically produced by Smiths Aerospace Inc under the CAGE Code 52013, providing traceability. Furthermore, with the NSN 5990-00-341-3194, one can also determine that this listing falls under Federal Supply Class (FSC) 5990 Synchros and Resolvers. Alongside such details, all purchases will come delivered with any applicable qualifying certifications, furthering the reliability of our purchasing options. With this in mind, be sure to request a quote on part number 20708 7C-001, and we will be in touch.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-00-341-3194 Item PartTypeName: SYNCHRO,CONTROL TRANSFORMER | 5990 | 003413194 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MILS20708-7C001 | 3 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAFZ | BODY MATERIAL | STEEL,CORROSION RESISTING |
| AAQL | BODY STYLE | STANDARD ROUND B |
| AAVH | SHOULDER DIAMETER | 1.0000 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.6250 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 2.3560 INCHES NOMINAL |
| ABKK | FLANGE DIAMETER | 1.0620 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.1872 INCHES NOMINAL SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.5620 INCHES NOMINAL SINGLE SHAFT |
| AHCG | MAXIMUM TEMP RISE | 10.0 DEG CELSIUS |
| AHYF | SECURING HOLE QUANTITY | 4 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 11.8 NOMINAL |
| AJSP | STATOR INPUT CURRENT RATING | 86.0 MILLIAMPERES MAXIMUM |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | 150.0 WATTS NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 396.0 MINIMUM AND 404.0 MAXIMUM |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | 118.00 MINIMUM AND 150.00 MAXIMUM |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | 78.00 MINIMUM AND 84.00 MAXIMUM |
| AJTL | ZRS IMPEDANCE MAGNITUDE IN OHMS | 130.00 MINIMUM AND 170.00 MAXIMUM |
| AJTM | ZRS IMPEDANCE ANGLE IN DEG | 23.00 MINIMUM AND 35.00 MAXIMUM |
| AJVF | PHASE SHIFT ANGLE IN DEG | 3.000 INPUT TO OUTPUT MINIMUM AND 6.000 INPUT TO OUTPUT MAXIMUM |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 15.00 OUTPUT |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 18.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| AJVM | SPLINE TOOTH QUANTITY | 21 SINGLE SHAFT |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 0.07 INCH-OUNCES MAXIMUM |
| AJWQ | PILOT LENGTH | 0.0620 INCHES NOMINAL |
| AJWR | SHOULDER LENGTH | 0.0620 INCHES NOMINAL |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.7320 INCHES MAXIMUM |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 120 SINGLE SHAFT |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| AKAF | SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| AKAN | SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| AKEJ | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNC |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | 0.1970 INCHES NOMINAL SINGLE SHAFT |
| CRSJ | SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| CRYY | MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | 0.112 INCHES |
| CWBH | SHAFT NOMINAL THREAD SIZE | 0.190 INCHES SINGLE SHAFT |
| TEST | TEST DATA DOCUMENT | 81349-MIL-S-20708 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTI |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 SCREW |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
